Riversdale

VHF Repeater:

Frequencies and Tones Output: 145.650 / Input: 145.050
Mode Analogue: FM (16K0F3E)

145650 Klipkop Coverage Prediction as for an average mobile station, does not take into account local obstructions like buildings or powerlines

145.650 Klipkop Coverage Prediction as for an average mobile station, does not take into account local obstructions like buildings or powerlines

UHF Link to Jonaskop:

Frequencies and Tones Output: 431.075 / Input: 438.675
Mode Analogue: FM (16K0F3E)

Jonaskop-Riversdale Link

Jonaskop-Riversdale Link

UHF Link to Danabaai:

Frequencies and Tones Output: 431.125 / Input: 438.725
Mode Analogue: FM (16K0F3E)

Klipkop Dana bay Link

DTMF codes:

6506 – Jonaskop Link
6505 – VHF Repeater
6504 – Danabaai Link

To check the status of a connection:
Send the 4 digit DTMF code only
An interrupted tone indicates OFF
A continuous tone indicates ON
To switch a point OFF:
Send the 4 digit code plus a #
To switch a point ON:
Send the 4 digit code plus a *

Any isolated repeater continues to work as a normal local repeater, but is not linked to the network.

The DTMF code must be entered within a few seconds between the first and the last digit, as there is a code-entry timer window. Press your PTT, then allow a second or two’s key-up delay before entering the DTMF code, to allow all links a chance to key up first.

ALWAYS give your callsign when interrogating and announce which point you are switching (BEFORE disconnecting, and AFTER reconnecting!)

Maintenance: